Volkswagen Key Programming Tips
Volkswagen offers a practical way to get an additional key or replace one that is no longer working. It's a simple process and cost-effective by following a few tricks.
First, you need to get the correct key fob. It should have a key blade that flips out, or be fixed in the key fob. Gather all the documentation needed to prove ownership. Finally, head to the dealership or a locksmith who is a third party.
Immobilizer
The immobilizer function is an anti-theft feature that stops keys that are not authentic or damaged from getting into the vehicle. The system detects a particular chip on each key. VW dealers or automotive locksmiths can program additional keys. However the procedure requires software and tools. The right tools are essential for a smooth experience. Before starting the key programming process, technicians should replicate the issue to identify the issue. They should also scan the vehicle for fault codes, search for technical service bulletins (TSBs) and test the battery in the key fob.
A Volkswagen key that is not programmed with an immobilizer chip can shut off the engine after a few seconds of cranking. The immobilizer chip doesn't stop the alarm from turning on or unlocking doors. The immobilizer for the key fob is an additional piece that is glued into the metal flip of the car keys. It needs to be programed into the computer in the vehicle in order to work.
It is more expensive to add a new VW key than to create duplicates after all the original keys have been lost. The key has to be purchased from the manufacturer and undergo an exclusive programming process to be synchronized with the computer in the vehicle. This can be accomplished with the help of a professional and a software tool such as VagTacho or VCDS. This process is best for vehicles with the older Immobilizer 2 system and earlier.
Electronic Ignition
The electronic ignition feature of the key is an essential component of the anti-theft security technology in a vehicle. It is activated when the key fob is fitted into the ignition. It's not a completely secure system however. It can be prone to failure, which could result in your Volkswagen's engine not working. This could be due to a number of causes, including defective key programming or a damaged car battery.
Luckily, you can prevent this problem by getting your Volkswagen car key fobs programmed professionally. This procedure can be performed by a dealer or a locksmith. The cost for this service varies, but the most common costs range from $90 to $150. replacing volkswagen key will also vary based on the vehicle's model and year.
You'll need your primary key to program the new VW key fob. The new key needs to be able to start the vehicle. This will allow the onboard diagnostics to recognize it as a legitimate key. Then, the immobilizer warning light will dim.
Certain models require a 3- to four-digit PIN code to allow onboard key programming. Certain models may require a scanning tool. A locksmith or dealer may utilize a scanner to program onboard keys. These scanners aren't sold in car accessory stores. You will need to purchase one from an individual dealer or borrow it.
Keyless Entry
If you've lost your Volkswagen key fob or it has a battery problem, the car may start but not unlock. This problem is easy to solve. First, make sure that the key fob can be seen by the vehicle. If it is, hold the lock button for six seconds, until the lights flash on the key.
This will reset the key fob's proximity to your VW. After that you can attempt to unlock the vehicle by pressing the unlock button on the key fob again. If the car doesn't unlock following this procedure, you'll have to contact the dealer to program the key.
The procedure of getting a brand new Volkswagen key programmed can be costly. It is best to ask for quotes from several dealers before selecting the one that is best for you. Also, determine if the dealer charges for key programming and for the new key itself.
A second Volkswagen key is a good idea for countless reasons. You might need an extra key in case your primary key is lost or stolen. If you have an extra key and you want to program it to ensure it can work with your Volkswagen, here are some simple steps to follow.
Remote Start
The remote-start systems of Volkswagen are different from the previous generation of key fobs which communicated using radio waves. Instead, they connect to your car through an encrypted wireless connection using cell technology. This means that your VW Atlas, Jetta, or Passat will be able to tell whether you're in range and activate its features such as push-button start or keyless entry. It's as easy as opening the app on your smartphone connecting it to your vehicle, then pressing the button.
Make sure that your Volkswagen is parked and that the driver's side door is closed. This will ensure only the correct key is used to access your vehicle's features. The dashboard will display an error in the event that the key is not recognised. This method is only compatible with newer VW models that are equipped with an RFID sensor ring on the steering wheel. These models require a secret pin to be programmed.
To program a new key fob, close the driver's door and take out the key used to program the initial one. Next press the lock button on the new key fob. This will signal to the vehicle that the key is a working key. It will then begin to transmit signals that allow you to unlock the driver's door and then remotely start your vehicle. Some have reported that this works only if there is clear sight to the car, but others have succeeded even in parking lots that are congested.